Exterior Sealer E900

Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Smoother Finish
  • Stronger Adhesion
  • Superior Hiding
Technical Information
  • Finish N/A
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surface of low porosity- 100-120 sq ft These figures are only an approximation guide. Due to variation in different surfaces, the coverage may vary. It is recommended to do a coverage trial before finalizing the paint requirement.
Product Features
  • Superior Hiding
  • Stronger Adhesion
  • Smoother Finish

Product Description

Dulux Professional Solitaire A900 is a premium water based, high quality durable and
washable emulsion paint with rich matt finish. It is suitable for all normal interior masonry
surfaces including particle board, fiber and insulation boards.

Application Description

Surface Preparation

Ensure that the surface is clean and free from grime, dust, flakes, grease etc. For old surfaces, remove all loosely adhering particles, powdery materials or defective paints by thorough brushing, scraping and water jetting, if required.
For best results and for surfaces that remain powdery, friable or chalky even after thorough preparation, application of topcoat material as primer with 1:1 dilution in water as an extra coat, is recommended.
For algae & fungus-affected area, application of Pre Treatment Coat is recommended.
On horizontal surfaces, it is recommended to do 3 coats of topcoat material.
Allow new surface to dry out completely. It is recommended to allow at least 12 weeks as the curing time for new masonry surfaces. Please ensure pH level between 7 & 9 before painting.
Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound.
Exterior Sealer E900 should not be applied to the surfaces or substrates which are exposed to continuous seepage or dampness.
For best adhesion performance, the moisture content in the wall should not exceed 10%.
Application Tools

By roller, brush or conventional /airless spray (nozzle size 0.5mm to 0.7mm)

Dilution
Dilute 1 part of Exterior Sealer E900 with 1 part of clean water by volume.

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and color.

Technical & Safety Documentation

Treatments such as sanding, burning off etc of paint fims may generate hazardous dust and other fumes. Wet sanding/flaming should bo used wherever possible. Work in well ventiated areas. Use suitable personal protection equipment Wear eye/hand protection Do not breathe vapour/spray Remove as much paint as possible from brushes and rollers before cleaning Avoid release to the environment Collect spillage Keep away from food, drinks and animal feed Store in a cool and shaded place Container must be in a secure, upright positon and be tightly closed In case of contact with eyes, rinse immediately with plenty of water and seek medical advice In case of contact with skin, wash immediately with $0ap and water ora propristary skin cleanser. Do not Do not emply into drains or water course. Safety data shot available or professionaliuser on request Do not use empty container for storing food rs Use only in wel ventated areas & olvents or thinners Lift with care - gross weight may exceed 10 kg

Tips & Advice

  • 1. Preparing the Surfaces
    New concrete/plaster surface should be allowed to mature properly. Ensure that
    the surface is clean, dry, free from all loose particles, dust, dirt, grease, wax etc.
    before application. All surfaces should be thoroughly rubbed down using a suitable
    abrasive paper and thereafter wiped off. Suitable remedial measures should be
    taken in case of water seepage/leakage problems. Fungus affected areas need
    separate treatment. For previously painted surfaces strip all the paint before
    starting the above process.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight.Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Fetching the data, please wait...