Solitaire StainResist

Prevents & delays stains from penetrating further & enhances ease of cleaning.
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Delivers 20% extra coverage in comparison to an ordinary emulsion. It results in more saving on painting cost, offering more value for money
  • Liquid stains will form beads and slide off surface with high water repellence
  • Prevents & delays stains from penetrating further & enhances ease of cleaning
Technical Information
  • Finish Mid Sheen
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surface of low porosity- 120-140 sq ft These figures are only an approximation guide. Due to variation in different surfaces, the coverage may vary. It is recommended to do a coverage trial before finalizing the paint requirement.
Product Features
  • Low odour, Low VOC
  • No added Lead & Mercury

Product Description

Dulux Professional Solitaire StainResist is an interior water based high quality durable
emulsion paint for decoration and protection of walls and ceilings and other surfaces like
particle board, fibre insulation board etc. Its superior Stain resistance against common
household stains ensures durable walls. It is also equipped with superior Fungal resistance.

Application Description

Surface Preparation

Proper surface preparation is a must to get the desired finish. New concrete/plaster surface should be allowed to mature properly.
Ensure that the surface is clean, dry, free from all loose particles, dust, dirt, grease, wax, etc. before application.
All surfaces should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off.
Suitable remedial measured should be taken in case of water seepage/leakage problems.
Fungus affected areas need separate treatment.
Application Tools
By roller, brush or airless spray (nozzle width between 0.5mm and 0.7mm)

Dilution
For Brilliant White & Pastel Shades dilute up to 40-45% (400-450 ml of water in 1 litre paint), for deep base shades dilute 25-30% (250-300ml of water in 1 litre paint).

Note: Normally two coats of paint are sufficient for complete opacity & desired finish. Deep base shades may require third coat for getting the desired opacity.

Technical & Safety Documentation

Treatments such as sanding, burning off etc of paint fims may generate hazardous dust and other fumes. Wet sanding/flaming should bo used wherever possible. Work in well ventiated areas. Use suitable personal protection equipment Wear eye/hand protection Do not breathe vapour/spray Remove as much paint as possible from brushes and rollers before cleaning Avoid release to the environment Collect spillage Keep away from food, drinks and animal feed Store in a cool and shaded place Container must be in a secure, upright positon and be tightly closed In case of contact with eyes, rinse immediately with plenty of water and seek medical advice In case of contact with skin, wash immediately with $0ap and water ora propristary skin cleanser. Do not Do not emply into drains or water course. Safety data shot available or professionaliuser on request Do not use empty container for storing food rs Use only in wel ventated areas & olvents or thinners Lift with care - gross weight may exceed 10 kg

Colour Range

CP5 Colour Palette (Painter) SESA, Colour Futures TM 2024 (Painter) SESA

Tips & Advice

  • 1. Preparing the Surfaces
    Proper surface preparation is a must to get the desired finish. New concrete/plaster surface
    should be allowed to mature properly. Ensure that the surface is clean, dry, free from all
    loose particles, dust, dirt, grease, wax, etc. before application. All surfaces should be
    thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off. Suitable
    remedial measured should be taken in case of water seepage/leakage problems. Fungus
    affected areas need separate treatment.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use
  • 3. Storing
    Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight. Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Fetching the data, please wait...