Exterior

Weathershield Anti-Carb

Matt Finish

Smooth water based Exterior coating to prevent ingress of carbon dioxide and provide Anti Carbonation complying to MORTH Specification

Healthcare

Residential

Education

Commercial

Key Information

Coverage400 - 450 grams / m² / 2 coats


Drying Time2 - 4 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

Dulux Professional Weathershield Anti-Carb is a smooth water based coating to prevent ingress of carbon dioxide thereby protecting steel reinforcement in concrete from corrosion. It is designed to be applied in two coats for protection of concrete substrates in a range of environments. Powered by the unique Carbon Shield Technology, It provides excellent all weather protection with its High DFT paint film. This coating also conforms to the MORTH* specification for Anti Carbonation coatings.

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.

 
1 Start 2 Complete

Features

  • Anti Carbonation paint compliant to MORTH* specification
  • Carbon Shield Technology
  • High Dry Film Thickness
  • Matt Finish
  • High Solid Content

Tips & Advice

Surface Preparation

  • Freshly Plastered surfaces must be allowed to cure completely. It is recommended to allow at least 12 weeks as the curing time for new masonry surfaces. Please ensure pH level between 7 & 9 before painting.
  • Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
  • If after thoroughly cleaning the surface, the surface still exhibits chalkiness, it should be coated with WS Sealer E1000 (recommended) or Exterior Sealer E900. For areas severely affected by algae or fungus application of Pre-Treatment coat is recommended.
  • Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound.
  • Weathershield Express should not be applied to the surfaces or substrates which are exposed to continuous seepage or dampness. For best adhesion performance, the moisture content in the wall should not exceed 10%

Application Tools
By roller, brush or conventional/airless spray.

DilutionDilute 1 lit of paint with 300-400 ml of water for brush application and 250ml of water for roller application. In case of dark colors, dilute 1 lit of paint with a maximum of 250ml of water.

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.