Weathershield Anti-Carb

Powered by the unique Carbon Shield Technology, It provides excellent all weather protection with its High DFT paint film.
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Anti Carbonation paint compliant to MORTH* specification
  • Carbon Shield Technology
  • High Dry Film Thickness
  • Matt Finish
  • High Solid Content
Technical Information
  • Finish Matt
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surface of low porosity- 400-450 grams / m2 / 2 coats These figures are only an approximation guide. Due to variation in different surfaces, the coverage may vary. It is recommended to do a coverage trial before finalizing the paint requirement.
Product Features
  • Anti Carbonation paint compliant to MORTH* specification
  • Carbon Shield Technology
  • High Dry Film Thickness
  • Matt Finish
  • High Solid Content

Product Description

Dulux Professional Weathershield Anti-Carb is a smooth water based coating to prevent
ingress of carbon dioxide thereby protecting steel reinforcement in concrete from corrosion.
It is designed to be applied in two coats for protection of concrete substrates in a range of
environments. Powered by the unique Carbon Shield Technology, it provides excellent all
weather protection with its High DFT paint film. This coating also conforms to the MORTH*
specification for Anti Carbonation coatings.

Application Description

Surface Preparation

Freshly Plastered surfaces must be allowed to cure completely. It is recommended to allow at least 12 weeks as the curing time for new masonry surfaces. Please ensure pH level between 7 & 9 before painting.
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
If after thoroughly cleaning the surface, the surface still exhibits chalkiness, it should be coated with WS Sealer E1000 (recommended) or Exterior Sealer E900. For areas severely affected by algae or fungus application of Pre-Treatment coat is recommended.
Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound.
Weathershield Express should not be applied to the surfaces or substrates which are exposed to continuous seepage or dampness. For best adhesion performance, the moisture content in the wall should not exceed 10%
Application Tools
By roller, brush or conventional/airless spray.

DilutionDilute 1 lit of paint with 300-400 ml of water for brush application and 250ml of water for roller application. In case of dark colors, dilute 1 lit of paint with a maximum of 250ml of water.

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.

Technical & Safety Documentation

Treatments such as sanding, burning off etc of paint fims may generate hazardous dust and other fumes. Wet sanding/flaming should bo used wherever possible. Work in well ventiated areas. Use suitable personal protection equipment Wear eye/hand protection Do not breathe vapour/spray Remove as much paint as possible from brushes and rollers before cleaning Avoid release to the environment Collect spillage Keep away from food, drinks and animal feed Store in a cool and shaded place Container must be in a secure, upright positon and be tightly closed In case of contact with eyes, rinse immediately with plenty of water and seek medical advice In case of contact with skin, wash immediately with $0ap and water ora propristary skin cleanser. Do not Do not emply into drains or water course. Safety data shot available or professionaliuser on request Do not use empty container for storing food rs Use only in wel ventated areas & olvents or thinners Lift with care - gross weight may exceed 10 kg

Colour Range

CP5 Colour Palette (Painter) SESA, Colour Futures TM 2024 (Painter) SESA

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae
    and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by
    water jetting if required. For areas severely affected by algae or fungus, application of
    Aquatech Pre-Treatment Coat is recommended. Fill up all minor cracks and defects with
    Dulux Aquatech Range of crack fillers as per requirement / cement and sand mixture in the
    ratio 1:3 Avoid application of putty or filling compound. Weathershield Anti-Carb should not
    be applied to the surfaces or substrates which are exposed to continuous seepage or
    dampness.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use.
  • 3. Storing
    Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight. Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Fetching the data, please wait...