Weathershield Express

Mid Sheen Finish

Best exterior wall solution in delivering higher efficiency and optimum protection with High-Bond Latex and SunReflect technology





Key Information

Coverage50 - 60 ft²/L

Drying Time2 - 4 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

Dulux Professional Weathershield Express is a primer and finish combination developed using the unique High BondTM Latex system. This special product delivers the same finish as conventional system (1 coat primer followed by 2-3 coats of top coat finish) without the need of a Primer. Suitable for both new build and repainting, this is the easiest way to transform exteriors of buildings.

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.

1 Start 2 Complete


  • High Bond Latex technology combines 2 functions in one solution
  • Strongly bonded molecules create a paint film which give supreme protection from alkali attacks
  • Does not harm the environment LOW VOC
  • Fungul Guard technology prevents the formation of black spots and fungal patches
  • SunReflect heat reflective technology. Reduces exterior surface temperature by up to 5°C, resulting in savings up to 15% per annum on the energy used to cool the home*
  • Reduces water consumption by 50%, as no primer is required

Tips & Advice

Surface Preparation

  • Freshly Plastered surfaces must be allowed to cure completely. It is recommended to allow at least 12 weeks as the curing time for new masonry surfaces. Please ensure pH level between 7 & 9 before painting.
  • Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
  • If after thoroughly cleaning the surface, the surface still exhibits chalkiness, it should be coated with WS Sealer E1000 (recommended) or Exterior Sealer E900. For areas severely affected by algae or fungus application of Pre-Treatment coat is recommended.
  • Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound.
  • Weathershield Express should not be applied to the surfaces or substrates which are exposed to continuous seepage or dampness. For best adhesion performance, the moisture content in the wall should not exceed 10%.

Application Tools
By roller, brush or conventional/airless spray.

Dilute 1 litre of paint with 400-500 ml of water for brush application and 300ml water for roller. In case of dark colors, dilute 1 litre of paint with a maximum of 250ml of water (An additional coat may be required for full opacity) 

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.