Exterior

Weathershield Sealer E1000

Dulux Professional Weathershield Sealer E1000 is a high-quality, high performance sealer cum primer for external plaster surfaces.

Healthcare

Residential

Education

Commercial

Key Information

Coverage125 - 150 ft²/L


Drying Time2 - 4 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

Dulux Professional Weathershield Sealer E1000 is a high-quality, high performance sealer cum primer for external plaster surfaces. It improves adhesion between the wall and the topcoat, protecting the surface for longer period of time. Its special acrylic formulation is based on a breakthrough technology, which permeates into the superficial layer of the wall and seals away surface problems.
 

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.

 
1 Start 2 Complete

Features

  • Resists ugly algae and fungus growth longer
  • Resists discoloured patches from dampness
  • Resists peeling and fading due to weathering

Tips & Advice

Surface Preparation

  • Dry Sanding, flame cutting or welding of the dry paint film will give rise to dust and hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
  • Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.Avoid inhalation of dust during cleaning of the surface.
  • For areas severely affected by algae or fungus, application of Pre-Treatment Coat is recommended.
  • Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound.
  • Freshly plastered surfaces must be allowed to cure completely.

Application Tools

By roller, brush or conventional /airless spray (nozzle size 0.5mm to 0.7mm)

Dilution
Dilute 1 part of Weathershield Sealer E1000 with 1 part of clean water by volume.

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and color.