Weathershield Sealer E1000

Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Resists peeling and fading due to weathering
  • Resists discoloured patches from dampness
  • Resists ugly algae and fungus growth longer
Technical Information
  • Finish N/A
  • Coverage The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surface of low porosity - 125-150 sq ft/L/2coats On textured surface of low porosity - 100-125 sq ft/L/2coats These figures are only an approximation guide. Due to variation in different surfaces, the coverage may vary. It is recommended to do a coverage trial before finalizing the paint requirement.
Product Features
  • Resists peeling and fading due to weathering
  • Resists ugly algae and fungus growth longer

Product Description

Dulux Professional Weathershield Sealer E1000 is a high-quality, high performance
Sealer cum primer for external plaster surfaces. It improves adhesion between the wall
and the topcoat, protecting the surface for longer period of time. Its special acrylic
formulation is based on a breakthrough technology, which permeates into the superficial
layer of the wall and seals away surface problems.

Application Description

Surface Preparation

Dry Sanding, flame cutting or welding of the dry paint film will give rise to dust and hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.Avoid inhalation of dust during cleaning of the surface.
For areas severely affected by algae or fungus, application of Pre-Treatment Coat is recommended.
Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound.
Freshly plastered surfaces must be allowed to cure completely.
Application Tools

By roller, brush or conventional /airless spray (nozzle size 0.5mm to 0.7mm)

Dilution
Dilute 1 part of Weathershield Sealer E1000 with 1 part of clean water by volume.

Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and color.

Technical & Safety Documentation

Treatments such as sanding, burning off etc of paint fims may generate hazardous dust and other fumes. Wet sanding/flaming should bo used wherever possible. Work in well ventiated areas. Use suitable personal protection equipment Wear eye/hand protection Do not breathe vapour/spray Remove as much paint as possible from brushes and rollers before cleaning Avoid release to the environment Collect spillage Keep away from food, drinks and animal feed Store in a cool and shaded place Container must be in a secure, upright positon and be tightly closed In case of contact with eyes, rinse immediately with plenty of water and seek medical advice In case of contact with skin, wash immediately with $0ap and water ora propristary skin cleanser. Do not Do not emply into drains or water course. Safety data shot available or professionaliuser on request Do not use empty container for storing food rs Use only in wel ventated areas & olvents or thinners Lift with care - gross weight may exceed 10 kg

Tips & Advice

  • 1. Preparing the Surfaces
    Dry Sanding, flame cutting or welding of the dry paint film will give rise to dust and hazardous
    fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the
    provision of local exhaust ventilation, suitable respiratory protective equipment should be
    used. Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease,
    fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush,
    followed by water jetting if required. Avoid inhalation of dust during cleaning of the surface.
    For areas severely affected by algae or fungus, application of Pre-Treatment Coat is
    recommended. Fill up all minor cracks and defects with cement and sand mixture in the ratio
    1:3. Avoid application of putty or filling compound. Freshly plastered surfaces must be
    allowed to cure completely
  • 2. Storing
    Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight. Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Fetching the data, please wait...